Filter
Filter
–
Brushed
RC Motors Brushed
1:10 Crawler/Boot brushed Combo 14T
This set is specially designed for new beginners and intermediate modelers. It not only carries forward the outstanding quality of ABSIMA (powered by HOBBYWING) products but simplifies the operation. FEATURES:- Water-proof and dust-proof for all weather races- Small size with built-in capacitor module- Multiple protections: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss protection- Easily programmed with "jumpers"SPECIFICATION:- Application: On-road/Off-road- Cont. / Burst Current - forward: 40A / 180A- Cont. / Burst Current - reverse: 20A / 90A- Input: 2-3S LiPo / 5-9 Cells NiMH- Battery "Low-Power" Cut-off: NiMH 4.5V / 2S LiPo 6.5V / 3S LiPo 9.75V- Motor Limit 2S LiPo/5-6 Cells NiMH: 540 or 550 Motor =12T or RPM <30.000 @ 7.2V- Motor Limit 3S LiPo/7-9 Cells NiMH: 540 or 550 Motor =18T or RPM <20.000 @ 7.2V- Maximum Reverse Force: 50% - Overheat Protection: 100°- Resistance: Fwd: 0.002 Ohm, Bwd: 0.004 Ohm- Built-in BEC: 2A/6V (Linear Mode BEC)- Plug System: Tamiya- Plug & Drive System: yes- On/Off Switch: yes- Dimmension (L/W/H): 46.5x34.0x28x5 mm- Weight: 70gSPECIFICATION MOTOR:- Turns: 14x2T- RPM: 26.300- Continuous Current: 160W- Operation V: 7.2V-7.4V- Motor size: 540- Shaft length: 12,3mm- Shaft diameter: 3,19mm- Motor length: 53,2mm- Motor diameter: 35,7mm- Brushess & Springs changeable: yes- Application: TruckSCOPE OF DELIVERY:- WP1040 Brushed ESC- 14T Electric Truck Motor- Manual
Product number: ABS-2100013
Manufacturer: Absima
€39.95*
1:10 Crawler/Boot brushed Combo 17T
This set is specially designed for new beginners and intermediate modelers. It not only carries forward the outstanding quality of ABSIMA (powered by HOBBYWING) products but simplifies the operation. FEATURES:- Water-proof and dust-proof for all weather races- Small size with built-in capacitor module- Multiple protections: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss protection- Easily programmed with "jumpers"SPECIFICATION:- Application: On-road/Off-road- Cont. / Burst Current - forward: 40A / 180A- Cont. / Burst Current - reverse: 20A / 90A- Input: 2-3S LiPo / 5-9 Cells NiMH- Battery "Low-Power" Cut-off: NiMH 4.5V / 2S LiPo 6.5V / 3S LiPo 9.75V- Motor Limit 2S LiPo/5-6 Cells NiMH: 540 or 550 Motor =12T or RPM <30.000 @ 7.2V- Motor Limit 3S LiPo/7-9 Cells NiMH: 540 or 550 Motor =18T or RPM <20.000 @ 7.2V- Maximum Reverse Force: 50% - Overheat Protection: 100°- Resistance: Fwd: 0.002 Ohm, Bwd: 0.004 Ohm- Built-in BEC: 2A/6V (Linear Mode BEC)- Plug System: Tamiya- Plug & Drive System: yes- On/Off Switch: yes- Dimmension (L/W/H): 46.5x34.0x28x5 mm- Weight: 70gSPECIFICATION MOTOR:- Turns: 17x2T- RPM: 28.800- Continuous Current: 155W- Operation V: 7.2V-7.4V- Motor size: 540- Shaft length: 12,3mm- Shaft diameter: 3,19mm- Motor length: 53,2mm- Motor diameter: 35,7mm- Brushess & Springs changeable: yes- Application: TruckSCOPE OF DELIVERY:- WP1040 Brushed ESC- 17T Electric Truck Motor- Manual
Product number: ABS-2100014
Manufacturer: Absima
€44.95*
1:10 Brushed Thrust B-Spec V2 19T/80A Combo
We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the speed controller. A programming card is also available, which can be used for even more settings. HIGHLIGHTS:One ESC suitable for all vehicle types (crawler, off-road, on-road, boat)Programmable via jumper and separately available programming card (Item 2110061)2S LiPo operation recommendedMotor ready soldered - plug-n-playProgrammable features (via programming card):Initial Start Force: 5%* / 13% / 21% / 29% Low V cut-off: 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft Standard Features ESC:Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.Low internal resistance and excellent heat dissipation.Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.Easy to program with pocket-sized jumper and programming card (sold separately - item 2110061)Specification ESC:Continuous/short-term load: 80A/320AResistance: 0.0014ohmSuitable motor types: Brushed standard motors Battery recommendation: 2S LiPo / 6 cells NiMHBEC 6.0V/5AMotor limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25.000RPM Measure: 41.5*35*29.5mmPlug system: T-plugWeight: 63.4gSpecification B-Spec Motor:Turns: 19TSpeed: 22.500RPMOutput power: 140WOperating voltage: 7.2-7.4VTechnical Size: 540Motor shaft: Length 12,3mm; Durchmesser: 3,18mm Motor size: Length 53,2mm; Durchmesser: 35,7mm Ball bearings: 2Weight: 165gIncludes:1:10 Brushed V2 Speed ControllerThrust B-Spec Brushed MotorAdhesive TapeManual
Product number: ABS-2100015V2
Manufacturer: Absima
€44.95*
1:10 Crawler/Boot brushed Combo 55T
This set is specially designed for new beginners and intermediate modelers. It not only carries forward the outstanding quality of ABSIMA (powered by HOBBYWING) products but simplifies the operation. FEATURES:- Water-proof and dust-proof for all weather races- Small size with built-in capacitor module- Multiple protections: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss protection- Easily programmed with "jumpers"SPECIFICATION:- Application: On-road/Off-road- Cont. / Burst Current - forward: 40A / 180A- Cont. / Burst Current - reverse: 20A / 90A- Input: 2-3S LiPo / 5-9 Cells NiMH- Battery "Low-Power" Cut-off: NiMH 4.5V / 2S LiPo 6.5V / 3S LiPo 9.75V- Motor Limit 2S LiPo/5-6 Cells NiMH: 540 or 550 Motor =12T or RPM <30.000 @ 7.2V- Motor Limit 3S LiPo/7-9 Cells NiMH: 540 or 550 Motor =18T or RPM <20.000 @ 7.2V- Maximum Reverse Force: 50% - Overheat Protection: 100°- Resistance: Fwd: 0.002 Ohm, Bwd: 0.004 Ohm- Built-in BEC: 2A/6V (Linear Mode BEC)- Plug System: Tamiya- Plug & Drive System: yes- On/Off Switch: yes- Dimmension (L/W/H): 46.5x34.0x28x5 mm- Weight: 70gSPECIFICATION MOTOR:- Turns: 55x2T- RPM: 7.700- Continuous Current: 85W- Operation V: 7.2V-7.4V- Motor size: 540- Shaft length: 12,3mm- Shaft diameter: 3,19mm- Motor length: 53,2mm- Motor diameter: 35,7mm- Brushess & Springs changeable: yes- Application: TruckSCOPE OF DELIVERY:- WP1040 Brushed ESC- 55T Electric Truck Motor- Manual
Product number: ABS-2100018
Manufacturer: Absima
€44.95*
1:10 Brushed Thrust B-Spec V2 55T/80A Combo
We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the speed controller. A programming card is also available, which can be used for even more settings. HIGHLIGHTS:One ESC suitable for all vehicle types (crawler, off-road, on-road, boat)Programmable via jumper and separately available programming card (Item 2110061)2S LiPo operation recommendedMotor ready soldered - plug-n-playProgrammable features (via programming card):Initial Start Force: 5%* / 13% / 21% / 29% Low V cut-off: 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft Standard Features ESC:Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.Low internal resistance and excellent heat dissipation.Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.Easy to program with pocket-sized jumper and programming card (sold separately - item 2110061)Specification ESC:Continuous/short-term load: 80A/320AResistance: 0.0014ohmSuitable motor types: Brushed standard motors Battery recommendation: 2S LiPo / 6 cells NiMHBEC 6.0V/5AMotor limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25.000RPM Measure: 41.5*35*29.5mmPlug system: T-plugWeight: 63.4gSpecification B-Spec Motor:Turns: 55TSpeed: 7.700RPMOutput power: 85WOperating voltage: 7.2-7.4VTechnical Size: 540Motor shaft: Length 12,3mm; Durchmesser: 3,18mm Motor size: Length 53,2mm; Durchmesser: 35,7mm Ball bearings: 2Weight: 165gIncludes:1:10 Brushed V2 Speed ControllerThrust B-Spec Brushed MotorAdhesive TapeManual
Product number: ABS-2100018V2
Manufacturer: Absima
€44.95*
Electric Motor Thrust eco 15T
15 turns32.000 rpm16A7.2 voltMotor size 540Shaft length: 8,6mmShaft diameter 3,19mmMotor length 54mmMotor diameter 35,7mm
Product number: ABS-2310060
Manufacturer: Absima
€11.95*
1:10 18T Electric Motor Thrust eco
18 turns28.000 rpm12A7.2 voltMotor size 540Shaft length: 8,6mmShaft Durchmesser: 3,19mmMotor length 54mmMotor Durchmesser: 35,7mm
Product number: ABS-2310061
Manufacturer: Absima
€11.95*
1:10 21T Electric Motor Thrust eco
21 turns25.300 rpm9A7.2 voltMotor size 540Shaft length: 8,6mmShaft Durchmesser: 3,19mmMotor length 54mmMotor Durchmesser: 35,7mm
Product number: ABS-2310062
Manufacturer: Absima
€11.95*
Electric Motor Thrust eco 35T
35 turns7.2 voltMotor size 540Shaft length: 8,6mmShaft diameter 3,19mmMotor length 54mmMotor diameter 35,7mm
Product number: ABS-2310063
Manufacturer: Absima
€11.95*
Electric Motor Thrust eco 45T
45 turns7.2 voltMotor size 540Shaft length: 8,6mmShaft diameter 3,19mmMotor length 54mmMotor diameter 35,7mm
Product number: ABS-2310064
Manufacturer: Absima
€11.95*
1:10 14T Electric Motor Thrust B-Spec
14x2 turns26.300 rpm160 watt7.2 - 7.4 voltSize 540Shaft length: 12,3mmShaft Durchmesser: 3,18mmMotor length 53,2mmMotor Durchmesser: 35,7 mm
Product number: ABS-2310073
Manufacturer: Absima
€22.95*
1:10 21T Elektro Motor Thrust B-Spec
Features : 21 x 2 Turns20.000 U/min135 Watt7.2 - 7.4 VoltBaugröße 540Wellen-Länge 12,3 mm Ø 3,18 mm
Product number: ABS-2310076
Manufacturer: Absima
€22.95*
Elektro Motor Thrust B-Spec Crawler 55T
Features: - 55x2 Turns- 7.700 U/min- 85 Watt- 7.2 - 7.4V- Baugröße 540- Wellen-Länge 12,3mm- Wellendurchmesser: 3,17mm- Motor Länge: 53,2mm- Motor Durchmesser: 35,7mm
Product number: ABS-2310078
Manufacturer: Absima
€22.95*
Motor Brushes f. Thrust B-Spec (2)
Passend für alle Thrust B-Spec Motoren
Product number: ABS-2310080
Manufacturer: Absima
€3.95*
Crawler Motor 35T Thrust B-Spec Brushed
35 x 2 Turns12.800 U/min 81 Watt7.2 - 7.4 VoltBaugröße 540Wellen-Länge: 12,3 mmWellen-Durchmesser: 3,18 mm Motor-Länge 53,2 mmMotor-Durchmesser: 35,7 mm2 Kugellager
Product number: ABS-2310082
Manufacturer: Absima
€22.95*
1:10 45T Electric Motor Thrust B-Spec Crawler
45 x 2 Turns9.800 RPM 80 Watt7.2 - 7.4 VoltSize 540Shaft length: 12,3 mmShaft Durchmesser: : 3,18 mm Motor length: 53,2 mmMotor Durchmesser: : 35,7 mm2 Ball Bearings
Product number: ABS-2310083
Manufacturer: Absima
€22.95*
Sold out
5mm to 1/8 conversion Sleeve 15mm
This is a 5mm to 1/8" Pinion Gear Conversion Sleeve from Hot Racing.This adapts 5mm Pinions to 1/8" PinionsFEATURES:CNC Aluminum ConstructionSilver in ColorINCLUDES:One conversion SleeveSPECIFICATIONS:length: (15mm)ID 1/8" (2.9mm)OD 4.95mm
Product number: HR-NSG518R08
Manufacturer: Hot Racing
€4.20*
RUDDOG-Cup 23T 3slot Motor
Winding: 23TStator: 3-slotVoltage range: 2-3S LiPo / 6-9 cells NiMHDimensions: 35.75x54mm (+4.5mm length for front ball bearing)Weight: 171gSpeed: 17,800rpm (@7.4V)Connector: 3.5mm gold contactsMotor shaft: 3.17mm
Product number: RP-0277
Manufacturer: RDRP
€19.95*
Crawler 550 10T 5-Slot Brushed Motor
Designed for all crawler fans are the RUDDOG Crawler brush motors, which are now also available in 550 size. These come as a 5-slot variant in five different windings. The double ball-bearing motors feature specially coated motor heads, replaceable motor brushes and springs, cooling vanes for the motor brushes, and they are completely rebuildable if needed over the course of their service life. The adjustable timing also allows use against the specified direction of motor rotation, which can be advantageous for use in vehicles with special transmission arrangements.Frame size: 550Winding: 10TStator: 5-SlotVoltage range: 2-3S LiPo / 6-9 cells NiMHDimensions: 35.75x62.5mm (+4mm length for front ball bearing)Speed: 15,500rpm (@7.4V)Weight: 215g
Product number: RP-0278
Manufacturer: RDRP
€31.95*