1:10 Race Truck - Truggy AT3.4v2 4WD RTR

The new 80A brushed speed controller is waterproof, programmable and pre-configured with a T-connector. To fully utilise the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item no. 2110061) can be used to set various parameters such as braking force, punch, low-voltage protection and much more.

The car is powered by a 540 15T brushed motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. Thanks to the higher output of the speed controller and the use of T-connectors, any 2S LiPo battery can be used - regardless of the C-rate and capacity.

4 oil-pressure shock absorbers offer ideal handling, so that a lot of driving fun is guaranteed. A servo with 15kg actuating force and metal gearing handles the steering commands.

Lightweight and compact design, as well as a comfortable and ergonomic shape - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, so that settings can be made easily using levers and rotary knobs. In addition, the remote control has a "beginner mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have much experience in handling such RC vehicles.

Highlights:
4WD all-wheel drive
2.4 GHz 4-channel radio system
80A brushed speed controller with T-plug
540 15T motor with 32,000 rpm @ 7.4V
15kg steering servo with metal gears (25T, ball bearings)
4 oil shock absorbers
Ball bearing main drive
Extremely durable composite plastic parts
Steel differential outputs
Aluminium main drive shaft with steel mounts
Adjustable upper tie rods
5mm aluminium motor mounts
6mm shock towers
2 differentials (front/rear)
Stylish truggy body with plastic add-on parts
"Light-Weight" chassis (less weight - longer driving time)
Many aluminium tuning parts available

Technical data:
Scale 1:10
Dimensions (L/W/H): 405x325x165 mm
Weight: 1740g
Wheelbase: 270mm
Ground clearance: approx. 35mm
Track width: 270mm front/rear
Wheels front/rear: Durchmesser: 105mm / width: 55mm
Shock absorber oil: 400CPS
Installation length of the shock absorbers: 90mm
Engine gear ratio: Pinion: 18T / main gear: 64T (module 0.6)

Scope of delivery:
1/10 Truggy "AT3.4V2" RTR
2.4GHz "CR4S" remote control
Sticker sheet
instruction manual

additionally required:
4x AA batteries for remote control
7.2V NiMH or 7.4V* LiPo drive battery (*recommended)
Charger (suitable for the drive battery)
Programming card for individual settings of the speed controller